Thank you for your recent shelving purchase! We are happy to help you with any questions you may have with installation. Please scroll down for specific instructions.

Floating Shelves

You Will Need: stud finder, pencil, level, power drill, screws provided, you may also need drywall anchors if studs aren’t available in two locations and a tile bit if you are installing over tile (consult with your contractor)

1. Chose a space on your wall that has two studs available (or more if you are installing a shelf longer than 60”). Use a stud finder.

2. Mark and Pre-Drill the wooden bracket to match the stud spacing (a custom bracket is located inside of each shelf).

3. Attach the bracket to the wall (into the studs) using the long screws provided - the bracket must be level and should have very little wiggle.

4. Slide the shelf over the bracket (the pre-drilled holes on the shelf = the top surface).

5. Secure the shelf to the bracket with the short black screws provided.

Floating Mantel Shelves

You Will Need: stud finder, pencil, level, power drill, screws provided, you may also need a special masonry drill bit and masonry screws (your contractor will know what is best in this situation)

1. Locate the studs available where your mantel shelf will be placed. Use a stud finder.

2. Mark and Pre-Drill the wooden bracket to match the stud spacing (a custom bracket is located inside of each mantel shelf).

3. Attach the bracket to the wall (into the studs) using the long screws provided - the bracket must be level and should have very little wiggle.

4. Slide the shelf over the bracket (the pre-drilled holes on the shelf = the top surface).

5. Secure the shelf to the bracket with the short black screws provided.

Solid Wood Slab Shelving

You Will Need: stud finder, pencil, level, power drill, brackets and hardware, you may also need special tile bits (your contractor will know what is best in this situation)

1. Follow instructions for installation specific to the hardware you purchased

2. Attach your shelf to the bracket using appropriate screws specific to your bracket system